September 2011
66
V1.44
Copyright © 2011 Adept Systems, Inc. and Control Network Solutions Ltd All Rights Reserved.
Drag a router device onto the network and uncheck the “Commission Device” box. Set
up the router to communicate between the IP channel and the TP-10 channel.
Once the device has been set up, right-click the device and select
Commission
. Choose
the
Service Pin Install
option. When LonMaker indicates that it is waiting for the service
pin, press
SRV P1
on the ENodeIV device. If the router and LonMaker are communicating
properly, LonMaker will commission the ENodeIV device, and the router device will turn
green in the LonMaker application. The following screen shots show how this is done.
Fig.4.2: Initial LonMaker Drawing
