September 2011
25
V1.44
Copyright © 2011 Adept Systems, Inc. and Control Network Solutions Ltd All Rights Reserved.
BSP VERSION
: The version of the board support package used to build the application firmware.
This is mainly for diagnostic and tracking purposes as the BSP is included in the firmware but
could be from a different build cycle.
SERIAL NUMBER
: The serial number for the router.
DEVICE CODE
: The unique device code for the router.
IP MAC ADDRESS
: The IP MAC or hardware address assigned to the router's IP port.
IP ADDRESS
: The IP address assigned to the router.
NODE ID (709.1)
: The 709.1-side (LON) unique Node ID number assigned to the router. If 852
bridge mode is enabled this is the near side of the router.
NODE ID (IP)
: The IP-side unique Node ID number assigned to the router. If 852 bridge mode is
enabled this is the far side of the router.
NODE ID (App)
: If Twin-Mode is enabled, the unique Node ID number assigned to the
monitoring application.
MODE
: The current operating mode of the router. The two possible modes are
Manual
, and
Normal
.
DATE and TIME
: The date (day, month, year), day of week, and time currently stored on the
router is displayed in these fields.
Change Date/Time
: Enter the desired Date, Day of Week, and Time in the appropriate fields.
Click the
Change Date/Time
button. This will update the current values stored in the real time
clock.
Time Zone
: The time zone is displayed in the pop up field.
Adjust for Daylight Savings Time
: Automatic adjust for daylight savings is selected by the
On/Off radio buttons.
DST Start, DST End
: These popup fields display and allow setting the data when daylight savings
time starts and ends.
Update TimeZone DST
: Clicking this button will update the TimeZone and Daylight Savings Time
settings selected above.
Enable Twin Mode Key
: Enter in this field the 16 character key to unlock the
Redundant Twin
Mode
feature. Click the
Update Keys
button. The feature should be immediately available and
the enhanced feature list at the bottom of the page should then include
Redundant Twin Mode
.
Enable Bridge Mode Key
: Enter in this field the 16 character key to unlock the
Bridging Router
Mode
feature. Click the
Update Keys
button. The feature should be immediately available and
the enhanced feature list at the bottom of the page should then include
Bridging Router Mode
.
Update Keys
:
This button processes the the enhanced feature keys fields and activates the
associated features.
