20
6. Place the Contour Core Belt™ over your
midsection with the gel pads directly on your
skin so the center line is over your belly button
and the outside pads are in between your ribs
and hip bones. Slip the end of the belt through
the loop on the right hand side of the belt.
Secure belt with hook and loop closure.
(fig. 8).
The belt should fit snugly but not be
uncomfortable.
7. Place the Belt Clip on the back of your M1 Device
by sliding the belt clip along the groves, towards
the display panel, until it clicks into place.
(fig. 9)
8. Clip the Contour MI device onto the slot on the
side of the CoreBelt™.
(fig. 10)
2. Get Set
Now that the Contour Core Sculpting System in ready it should take only a few
seconds to use it in future workouts. Now let’s get ready for a great workout.
5.
Remove gel pad plastic liners.
(fig. 67)
Set aside
and SAVE so they can be reapplied after your
workout. Gel pads may remain on belt after
session simply reapply the plastic gel pad liners
to the black sides of each gel pad. This will
ensure longer gel pad life. Replace gel pads
after approximately 30 uses.
fig. 7
fig. 9
fig. 10
fig. 8
Qu
ic
k-
St
ar
t
Gui
de
