Safety notice
− Read carefully this manual before operating the system and reserve it for
future reference.
− Warranty does not apply if damage is caused by failure to follow the instructions.
− Installing the smartphone car docking station in your vehicle requires a
good understanding of your car’s electrical system. If you are not comfortab-
le installing it yourself, we strongly recommend you to contact an approved
professional to install it.
− Use only the supplied mounting hardware for a safe and secure installation.
− This device is designed only for installation in covered vehicles, protecting
it from moisture extreme heat, and direct exposure to the sun, dust, dirt,
excessive vibration, all of what could damage it.
− The electronic part is designed for negative ground 12 VDC operation only.
− This device cannot be installed on vehicles with a different operating voltage
(24-V trucks, 6-V mopeds, etc …).
− The device comes with a 15-A protective fuse. It is therefore recommended
that you check whether your vehicle is equipped to draw such a current. If it
cannot, you must first create the ability for your vehicle to draw a
15-A current before continuing.
− If the fuse blows, it must be replaced with an equivalent fuse. Replacing the
fuse with a higher voltage can not only destroy your device, but also serious-
ly impact your vehicle’s entire electrical system.
− A blown fuse rarely happens on its own. It is therefore strongly recommended
that you check your entire system before replacing it.
− To keep the warranty valid, do not open the cover and do not repair yourself.
Consult the dealer or an experienced technician for help.
Safety notice
73
GB
Conti_AutolinQ_A5_DE_ES_FR_GB.indd 73
10.07.2014 09:22:46
