W415-1350 / 12.16.14
34
EN
Tear the embers into pieces and place on top of the front burner area behind
the charcoal strip. Care should be taken to shred the embers into thin, small
irregular pieces as only the exposed edges of the
fi
bre hairs will glow.
The em-
ber material will only glow when exposed to direct fl ame; however, care
should be taken to not block the burner ports.
Blocked burner ports can cause an incorrect
fl
ame pattern, carbon deposits and
delayed ignition.
PHAZER
TM
logs glow when exposed to direct
fl
ame. Use only
certi
fi
ed "glowing embers" and
PHAZER
TM
logs available from your Authorized
dealer.
7.4 GLOWING EMBER PLACEMENT
GLOWING EMBERS
GLOWING EMBERS
7.5 LAVA
ROCK
Lava rock should be spread out evenly around the burner on the
fi
rebox base.
NOTE: Lava rock is not to be placed on the burner.
7.6 LOGO
PLACEMENT
Remove the backing of the logo supplied and place on the
glass viewing door or bottom access panel as illustrated.
1” (25mm)
1/2” (13mm)
1/2” (13mm)
1/2” (13mm)
