W415-1350 / 12.16.14
39
EN
Low battery alarm
Key Lock
Room
Temperature
Night Light
Flame ON
Blower
Transmission
CPI mode
9.1 GENERAL TRANSMITTER LAYOUT
9.2 INITIALIZING THE TRANSMITTER FOR THE FIRST TIME
A.
Power the receiver.
B.
Press the reset button to begin the programming process.
C.
The receiver will BEEP 3 times to indicate that it is ready to synchronize with a
transmitter.
D.
Install the 3 AAA batteries into the transmitter battery bay, located on the base
of the transmitter, then press the “ON” button. The receiver will BEEP 4 times to
indicate the transmitter’s command is accepted and sets to the particular code of
that transmitter. The system is now initialized.
NOTE: THE INITIALIZING PROCESS MUST BE COMPLETED WITHIN 10 SECONDS OF
PRESSING THE RESET/PROGRAMMING BUTTON.
RESET BUTTON
RECEIVER
TRANSMITTER