EN
W415-2801 / 01.21.20
15
fi nishing
3.3 log
placement
3.3.1 log placement for CDI3 / CDI3E
!
WARNING
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
•
The logs are fragile and should be handled with care.
If applicable, insert the following statement:
“
PHAZER™
logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
more uniform as colour pigments burn in during the heat-activated curing process.”
note:
Log numbers are located on the bottom or back of the logs.
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
Burner Overview
Insert only if
applicable ---->
PHAZER™
log and glowing embers, exclusive to Wolf Steel Ltd., provide a unique and realistic glowing effect that
is different in every installation. Take the time to carefully position the glowing embers for a maximum glowing ef-
fect. Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colour
pigments burn in during the heat-activated curing process.
Pilot Shield
Burner Ports
Studs
(Log #2)
Studs
(Log #3)
Lower Media Tray
(Logs #6, #7, and #8)
A1
A2
B2
B1
note:
Log numbers are located on the bottom or back of the logs.
