EN
W415-2801 / 01.21.20
19
fi nishing
Randomly place the charcoal embers along the front and sides of the log support in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
!
WARNING
•
Do not block or close off the burner ports. Blocked ports can cause an incorrect fl ame pattern, carbon
deposits and delayed ignition.
•
When supplied, charcoal embers, charcoal lumps and vermiculite are not to be placed on the burner.
note:
Charcoal embers are not to be placed on the burner.
3.7 charcoal
embers
4 AA batteries must be installed into the receiver before the appliance can operate by battery backup. The re-
ceiver is located in the bottom right corner of the appliance
(Fig. 3-4)
.
1. Remove the battery cover plate by pushing the two tabs that hold the cover in place.
2. Remove the 4 AA batteries in the battery holder and replace with new ones.
3. Reinstall the cover plate.
note:
Ensure the 3 position slider
switch is in the "REMOTE"
position (middle position).
Fig. 3-4
CDI3E Illustrated
3.8 battery
installation
note:
Note the polarity of the batteries and insert as indicated on the cover (+/-).
3.9
battery installation (CDI3E)
1. Remove battery holder by sliding it forward from the
bracket
(Fig. 3-5)
.
2. Install 4 batteries.
3. Reinstall battery holder.
Fig. 3-5
Battery Holder
Bracket
Fig. 3-4
C
