EN
W415-3096 / C / 05.03.22
49
finishing
Before placing anything above a heat source, it is advisable to follow proper clearances and
manufacturer’s instructions.
MINIMUM CLEARANCES CHART
A
6" (152mm) MAX
B
41 5/8" (105.7cm) (REAR VENT)
B
50 1/2" (128.3cm) (TOP VENT)
SAFETY
BARRIER
A
B
SAFETY
BARRIER
B
A
C
D
9.5 recessed installation
*See "minimum enclosure clearances" section
A.
When a mantel is installed between the appliance and an electronic device or other materials, the effect
of direct heat on the electronics or other materials will be reduced. Follow mantel height and depth
instructions for proper clearances.
B.
Refer to “minimum mantel clearances” section for more detailed mantel clearance information.
• Installing a television or other electronics above the appliance may cause discolouration, melting, or damage to
the electronics. Use clearances as guidelines and refer to your manufacturer's instructions for further information.
!
WARNING
note:
Increasing the horizontal length of the mantel will further reduce the intensity of heat on the electronics.
