EN-36
Defrost
This device is designed with an automatic defrost function, so no
need to defrost it manually.
Replace the lamp
The
freezer
uses an LED lamp for lighting, which is characterized by
low energy consumption and long service life. In the event of an
anomaly, please contact the after-sales service for a visit. The lamps
can only be replaced by the manufacturer, as well as part of the device.
Safety and verification after maintenance
Is the power cord broken or damaged ?
Is the power plug firmly inserted into the outlet ?
Is the power plug overheating abnormally ?
Note: Electric shock and fire can occur if the power cord and plug
are damaged. In the event of an anomaly, please disconnect the power
plug and contact the seller.
How to disassemble the shelf
parts:
Hold one end of the shelf and lift it up while pulling it outward.
Flip cover:
Keep the cover hinged in the vertical direction, align it with the opening
of the rotating shaft on the right side and pull it outwards to remove it.
Do not close the door with the hinged lid open, otherwise
the
freezer
door may be damaged