Conti MONTE-CARLO, Technical Documentation Manual

Page: 5 / 60

MONTE-CARLO - 11/2015 - SOFT V 2.11 5
4
INSTALLATION
4.1
Standby
In case of a standby of the machine (standby = 2 months):

The first thing to do is to test your machine in a lab.

If the machine stops running for a long time, you could have sediment in some places.

More precisely in small area like the spray nozzle.
4.2 Protections

It is necessary to place before the machine:
o
A water shut off valve.
o
An electrical protection standard, suitable for voltage and power consumption.
4.3 Water supply

Recommended operating pressure from 1.5 MPa to 6 MPa

Water connection pin 3/8"

The water supply pipes must resist to 145 Psi / 10 MPa
4.4 Drain

Without pressure.

A tip on the outlet of the machine and a pipe is supplied with the machine

Ensure a connection that causes no risk of fluid return, and ensure good drainage:

The drain pipe must be located lower than the machine.

Do not create a bend in the exhaust tube.
4.5 Supplying voltage

To be specify when ordering : 230V
– 50/60Hz Monofase

Or : 400V
– 50/60Hz Trifase