Installation
6
Installation
Follow the steps below for quick and easy installation of your scanner and scanner drivers.
System requirements
•
PC or supported workstation. Recommended requirements: Core 2 processor, 2 GB RAM, 5 GB of available hard drive space, USB 2.0 interface.
•
Compatible Windows operating system – View the ws/readme.htm file on the
WIDEsystem TOOLS
CD-ROM.
•
Enabled USB port on your PC.
•
The
WIDEsystem TOOLS
CD supplied with your scanner.
•
Scanning software and/or compatible third party software.
See the section on Software Applications for Scanning
»
•
Grounded power outlet.
Installation step by step
Set up the scan station
Your scanner should be placed either on the specially designed stand-alone floor stand
or on a sturdy table. Make sure there is enough space behind the scanner to allow the
media to run out.
IMPORTANT:
DO NOT YET CONNECT THE SCANNER TO
POWER OR PC.
See also the Safety Instructions at the end of this operator’s
guide
Install drivers and tools on your PC
IMPORTANT:
You must install your scanner’s drivers and tools before you
connect the scanner or install any scanner software applications.
1. Insert the WIDEsystem TOOLS CD-ROM into your PC. Normally the setup
program interface will start automatically. If it does not, locate the setup.exe file on
the CD and start it manually.
2. Install
WIDEsystem
. Follow the installation guide on your screen. You will be
asked to select your language and other important system preferences.
3. Install
Scanner Maintenance
. Follow the installation guide on your screen. You will
be asked to select your language.
4. Remove the CD-ROM when installation is complete.
2
1
