7
Turning the Scanner ON/OFF
17
Sleep mode options - automatic entry and idle time
On delivery, the scanner is set for automatic entry into sleep mode after a
preset
idle
time, i.e., the length of time the scanner is not active. You can
prolong or shorten the idle time value to match your normal workflow.
To change/set the sleep mode options:
1. Double-left-click on the scanner icon
in the system tray to open the
WIDEsystem program.
2. Select
the
Timer
Tab.
3. Select or deselect the
Enter Sleep mode automatically
option.
4. If you do not select the
Enter Sleep mode automatically
option, you will
need to use
the manual method for entering sleep mode
.
5. If you do select
Enter Sleep mode automatically
option, proceed to the
next step to set the
Idle time
value.
6. Set the value
Idle time before entering sleep
. This is the number of
minutes the scanner can stand idle before entering the sleep mode on
its own.
7. Press
Apply
to download your settings into the scanner’s memory.
Sleep Mode options in the WIDEsystem program – Timer tab
NOTE
: With the scanner main power ON, the scanner can also be
brought into Wake-up and Sleep modes
manually
even while the
Enter
sleep mode automatically
option is selected.
•
Wake
- by pressing any button on the panel or inserting a document for
scanning.
•
Sleep
– by pressing and holding down the power button for 3 seconds.
You can choose to disable automatic entry into
Sleep
mode
entirely if you
want only manual activation of the sleep mode or, you can leave it enabled
and retain both manual and automatic functions.
