Maintenance
38
Detaching the glass plate –
Tip the glass plate edge upwards
After releasing the latches, the glass plate is now free for removal.
1. Stand at the front side of the scanner.
2. Insert you thumbs under the glass plate edge around the middle area as shown in the
illustration on the right.
NOTE:
If you can’t get your thumbs under the glass - use the sharp, flat tool from
step 5 to tip the glass high enough to get a thumb underneath.
3. Tip the glass back and up so its two ends are free.
Detaching the glass plate –
Lift the glass plate edge out of the scanner
1. Move your hands, one at a time, to each end of the glass.
2. Apply light pressure with each hand as you lift the glass out of the scanner.
CAUTION
: The glass plate is long and thin and thus fragile. Take care not to break it.
8
7
