Installation
6
Adjust the scanner’s feet for sturdy
placement
The scanner rests on feet placed at the bottom of the scanner. There
are 3 fixed feet and 2 adjustable feet (total of 5 feet). See the
instructions below for feet adjustment.
1. The two outer feet closest to the operator’s panel side are
adjustable. The middle foot on the same side and the two feet
on the other side are fixed.
2. The 2 adjustable feet should be positioned (tightened) all the
way up when setting up the scanner on its new surface. They
are delivered in that position from the manufacturer.
3. The 2 adjustable feet (in their original position as described in
step 2) are slightly shorter than the 3 fixed feet. Therefore the
scanner will at first rest only on the 3 fixed feet (1 on the
operator panel side and 2 on the opposite side).
4. Use a screwdriver or an alternative long slim object to access
and rotate the 2 adjustable feet until they touch the surface so
all 5 feet are in contact with it.
5. If the scanner is moved, the 2 adjustable feet must be
retightened to their original (shortest) position and the steps
above must be repeated.
IMPORTANT:
DO NOT YET CONNECT THE SCANNER TO POWER OR PC.
2
