Maintenance
30
Cleaning the scan area (glass)
Follow the steps below for thoroughly cleaning the scan area. Be sure to
clean the scan area when results are not optimal. Even small dust particles
in the scan area can cause streaks in your scanned image.
To clean the scan area
You need to open the lid to access and clean the glass. Follow the
instructions below.
Caution
: do not use abrasives, acetone, benzene or fluids that
contain these chemicals. Do not spray liquids directly onto the scanner
glass-plate or anywhere else in the scanner.
Caution
: Before cleaning the scan area, be sure to turn the scanner
power off and disconnect the power plug.
.
Cleaning the scan area
Turn scanner power off and disconnect
1. Press the main power switch (scanner back) to OFF
2. Disconnect the power plug.
1
