Turning the Scanner ON/OFF
21
Wake and Sleep modes
With the main power switch ON, scanner power can be set in
Sleep mode
and
Wake mode
.
Sleep
mode is the energy saving mode. The scanner
cannot scan when in the
Sleep
mode.
Wake
mode is the full power ON
mode for scanner operation.
The scanner will go from
Wake
mode into
Sleep
mode:
•
Automatically: after a set idle time (see section:
•
Manually: when you hold the power button down for 3 seconds.
The scanner will go into
wake
mode:
•
When you press any button on the panel.
Advantages with using Wake-up and Sleep modes:
Ready faster:
You turn the scanner OFF and ON (sleep/wake-up) by
pressing the power key on the panel. The scanner skips its init sequence
and is ready to scan sooner than with
Main Power OFF
to
ON
.
Convenience
: When OFF (LED is yellow) the scanner can be powered up
(Wake-up) easily by pressing the power key thereby indicating you wish to
scan.
Save energy:
Sleep mode runs at low power values.
