TD060100-0MA
29
4.
Use the
JC-MER-CXB
Planning Form B to generate a
new
router
file. The file should be a list of subnet
address and IP
address pairs of the form:
nnn xxx.xxx.xxx.xxx
where “nnn” is the subnet address and “xxx.xxx.xxx.xxx” is the
IP address for the
JC-MER-CXB
attached to that
subnet. The
last line of the
router
file should be a line
containing “000.”
Once you have built a new
router
file that lists all of the subnets,
a copy must be placed in each
JC-MER-CXB attached to the
system.
5.
Configure the new hardware and install it as described in a
previous section, Adding a New Metasys
ARCNET
Subnet.
6.
Use the
JC-MER-CXB
Planning Form B to update the
TCP/IP
configuration on each of the existing
JC-MER-CXB units. The
procedure for updating the TCP/IP information is
described in a
previous section, Changing the Ethernet Network.
7.
To update the DDL files for Metasys, use the
JC-MER-CXB
Planning Form A. The only changes you should have to
make
are to the Network Definition and the Global Definition
DDL
files to change the subnet addresses for each NCM
and each
PCI/OWS
. If you add new NCMs to the system, you will most
likely update the DDL files to add the data base information for
the new NCMs when you update the subnet and node addresses
for the Metasys devices.