TD060100-0MA
2
7
6.
Modify the
information
in each
JC-MER-CXB using the
configuration program. Add a new
line to the
screen that lists
the subnet address and the IP address for
the new
router. For
example, if you are adding subnet number
12 with IP address
192.168.22.236, add the following line:
12 192.168.22.236
Add the new line before the line contain
ing
the three zeros (000).
After you have edited the
screen
,
save it
s information
using the
save command (Ctrl-K
, S
). Then use the
download
program to
copy the new
address information
to
all of the JC-MER-CXB
devices
used in the system.
To download the new
information
, reboot the
JC-MER-CXB that
contains
the new
configuration and
after the
router has started
running,
enter
download
at the
prompt. Follow the instructions
provided
and note any
messages displayed. After the new
configuration
has been
successfully downloaded to all
other
routers, reboot the
originating router by typing in
reboot.
Note:
The
IP address of the router with the new configuration
must appear in the configuration screen of every
other
JC-MER-CXB in the network. A receiving router will
not accept information
from a
device
that
is not
listed
in its existing configuration screen
.
7.
Add the new NCM or
PCI/OWS
to the new ARCNET segment
by
follow
ing
the procedures for adding an NCM or
PCI/OWS
to
an
existing ARCNET segment, as described previously.