UM-15094500-AA0
Page 27
The thermostat supports DHCP addressing and will acquire an IP address from the
router/access point automatically if you chose
Enable
next to DHCP. If you chose
Disable
,
you must assign an
IP Address
,
Network Mask
, and
Gateway Address
within the Wi-Fi
router IP subnet manually.
A reboot of the thermostat is required for new IP configuration to take effect. Click the
Save & Restart
button to reboot the thermostat, and you will be prompted to confirm the
restart. Click
OK
to Save New Settings and Restart or click
Cancel
to revisit IP
configuration.
When
OK
is clicked, a confirmation is displayed to indicate configuration is stored in the
thermostat’s internal memory. After reboot, the new thermostat credentials will be
admin
for username and the newly configured Access Point’s password for password.