UM-15094500-AA0
Page 25
The BAST-321HP-BW2 will initially boot up as a Wi-Fi Access Point to allow for IP
configuration. This requires connecting to the thermostat as an access point for initial
configuration using a Wi-Fi enabled laptop/computer/tablet/smart phone. Look for the
BAST-321HP-BW2 with its unique SSID of “WiFi-623B-xxxx” and no access point
passphrase by default (simply click to connect to Access Point). The digits “xxxx” in “623C-
xxxx” are the last 4 digits of the thermostat’s Wi-Fi chip MAC address found written on the
back side of the Wi-Fi module.
This ensures a unique SSID for discovery and configuration and it can assist in
identification of thermostats when multiple Wi-Fi stats are installed on the same site
(unique identifier outlined in blue in the image below). This unique identifier can also be
viewed in
Engineering Menu
item (
Phy3
).
Once connected to the thermostat as an access point, open its web page by typing its
default address of
192.168.0.1
with
admin
for username and
no password
. Web page
pictured below will be presented for IP Network Configuration. The default IP configuration
is shown below.