7. BIOS Setup
SPI-8550-LLVAS
47
You can make the following selections on the Main Menu itself. Use the sub menus for other selections.
Feature Options
Description
System Time
HH:MM:SS
Set the system time.
System Date
MM/DD/YYYY
Set the system date.
Legacy Diskette A
Legacy Diskette B
360 kB, 5 ¼"
1.2 MB, 5 ¼"
720 kB, 3 ½"
1.44/1.25 MB, 3 ½"
2.88 MB, 3 ½"
Disabled
Select the type of floppy-disk drive installed in your
system.
[Disabled] is chosen when not using FDD.
Primary Master
Set to the type of the drive on primary IDE master.
Primary Slave
Set to the type of the drive on primary IDE slave. *2
Secondary Master
Set to the type of the drive on secondary IDE master.
Secondary Slave
This field is set to [AUTO]
by default. You can leave
it intact for normal use.
*1
Set to the type of the drive on secondary IDE slave. *2
System Memory
N/A
Displays amount of conventional memory detected
during boot up.
Extended Memory
N/A
Displays the amount of extended memory detected
during boot up.
*1 Selecting this field changes the screen to the submenu for manually setting drive configuration data such as the
number of cylinders.
*2
This product
is supporting two IDE ports that are called primary and secondary. Each port supports two drives
of the master and the slave. Please do not connect it of the slave alone.
You can set the boot sequence of the bootable drives by selecting Boot Sequence on the Main Menu or
opening the Boot Menu.
Primary/Secondary Master, Slave
The Master and Slave sub-menus accessed from the Main Menu control these types of devices:
Hard-disk drives
Removable-disk drives such as Zip drives
CD-ROM drives
This board supports up to two IDE disk adapters, called primary and secondary adapters. Each adapter
supports one master drive and one optional slave drive in these possible combinations:
1 Master
1 Master, 1 Slave
2 Masters
2 Masters, 1 Slave
2 Masters, 2 Slaves
Note:
Do not attempt to change these settings unless you have an installed drive that does not
autotype properly (such as an older hard-disk drive that does not support autotyping).
Summary of Contents for SPI-8550-LLVAS
Page 7: ...vi SPI 8550 LLVAS...
Page 13: ...1 Introduction 6 SPI 8550 LLVAS...
Page 19: ...2 System Reference 12 SPI 8550 LLVAS...
Page 47: ...4 Jumper Setting 40 SPI 8550 LLVAS...
