2. System Reference
SPI-8550-LLVAS
7
2.
System Reference
Specification
Table 2.1.
Functional Specifications <1/2>
Type Specification
CPU(Option)
Intel(R) Pentium(R) M Processor 1.6GHz - 2.0GHz (FSB400MHz),
Intel(R) Celeron(R) M Processor 1.3GHz - 1.6GHz (FSB400MHz)
478pin FC-PGA
Cache Built
in
CPU
Processor socket
Socket 478
Memory(Option)
Max.2GB, 184 pin DIMM socket x 2, PC2700 DDR SDRAM, Supported ECC
Chipset
Intel(R) ICH4
BIOS
Phoenix BIOS, PnP support
VGA
Built in Intel 855GME,
One Analog RGB/Panel Link I/F (One DVI-I connector),
One LVDS(18bit) I/F (Two box-header 20-pin connectors)
Keyboard / Mouse connector
One PS/2 keyboard/Mouse connector(Bundled the 2 in 1 cable) , One box-header 5-pins
connector for external keyboard
Serial I/F
16550 UART
Two box-header 10-pin connector (RS-232C x 1, RS-232C/422/485 x 1),
Baud rate: 50 - 115,200bps (programmable)
Parallel I/F
One box-header 26-pin connector,
One high-speed parallel port, support SPP/EPP/ECP mode
On board expansion bus
None
LAN Port
1000BASE-T/100BASE-TX/10BASE-T Intel 82541PI controller *1
100BASE-TX/10BASE-T, Intel ICH4 integrated controller
Two RJ-45 connectors, Wake On LAN support
IDE I/F
Two EIDE ports, up to four IDE devices,
Two box-header 40-pin connectors, support Ultra DMA 33/66/100 *2,
The CF card slot and it shares with a secondary port.
SATA I/F
Two Serial ATA 1.0 compliant ports,
Controller: Silicon Image Sil3512 (RAID 0/1 support)
FDD I/F
One FDD port, up to two floppy drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB) ,
One box-header 34-pin connector, 3.5 inch 2mode I/F
CF Slot *3
Type I/II x 1, IDE secondary port connection, Support booting *4
SSD Socket
None
USB Port
6ch USB2.0 compliant ports, Three box-header 10-pin connector
RAID
RAID 0 or 1 is supported by connection HDD drive to the SATA I/F
Audio
AC97 CODEC., One pin-header 10-pin connector for speaker-out, line-in,
microphone-in.
Watchdog Timer
1 - 255sec, 255 level
When time up: RESET
General-purpose I/F
None
Hardware Monitor
Monitoring of the temperature of CPU and board, power supply voltage, and fan speed
The RTC(real-time clock) and CMOS data backup by the lithium battery.
The coin type Lithium battery specification is shown in table
Specification CR2450
Voltage 3V
Capacity 620mAh
Weigh 6.3g
RTC/CMOS
* Backup time: Over 7 years at none AC power 25ºC.
* Real Time Clock accurate:
±
3 minutes/month at 25ºC.
Summary of Contents for SPI-8550-LLVAS
Page 7: ...vi SPI 8550 LLVAS...
Page 13: ...1 Introduction 6 SPI 8550 LLVAS...
Page 19: ...2 System Reference 12 SPI 8550 LLVAS...
Page 47: ...4 Jumper Setting 40 SPI 8550 LLVAS...