manualshive.com logo in svg

Contec SLC-8550-LVA, User Manual

Share
Download
Contec SLC-8550-LVA User Manual Download Page 25

3. Hardware Installations

                                                                                                                                           

 

18

SLC-8550-LVA

Front Panel & External Keyboard / Mouse
Connector: CN11

CN11 consist of 20-pin connector that using the Hirose’s DF13A-20DP-1.25V and can be connected to a
front panel power switch.

The front panel connector for these I/O connections:

Power Switch (Power BT)

This header can be connected to a power push switch for ATX power supply.

Reset Switch (RESET)

This header can be connected to a reset push switch.

Power LED

This header can be connected to an LED that will light when the computer is powered on.

IDE drive activity LED (IDE ACT)

This header can be connected to an LED to provide a visual indicator that data is being read from or
written to an IDE drive. For the LED to function properly, the IDE drive must be connected to the
onboard IDE controller.

Speaker (BUZZER)

A speaker can be installed on the product as a manufacturing option.    The speaker is connected by a
jumper on pins 9, 11 of this connector.

External keyboard and mouse

This header can be connected to an external PS/2 keyboard and mouse. When the keyboard (mouse) is
connected to Keyboard/Mouse connector (CN21), this connector cannot be used together.

Summary of Contents for SLC-8550-LVA































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands