1. Introduction
SLC-8550-LVA
3
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting in
injury or death and the destruction of equipment and resources. Understand the meanings of these labels
to operate the equipment safely.
DANGER
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury or in property damage.
Handling Precautions
CAUTION
-
Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
-
Do not strike or bend the board.
-
Otherwise, the board may malfunction, overheat, causes a failure or breakage.
-
Do not touch the board's metal plated terminals (edge connector) with your hands.
-
Otherwise, the board may malfunction, overheat, or cause a failure. If the terminals are touched by
someone's hands, clean the terminals with industrial alcohol.
-
There are switches and jumpers on the board that need to be set in advance. Be sure to check these
before installing to the expansion slot.
-
Only set the switches and jumpers on the board to the specified settings.
-
Otherwise, the board may malfunction, overheat, or cause a failure.
DANGER
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to the manufacture’s
instructions.
Summary of Contents for SLC-8550-LVA
Page 7: ...vi SLC 8550 LVA...
Page 19: ...2 System Reference 12 SLC 8550 LVA...
Page 31: ...3 Hardware Installations 24 SLC 8550 LVA...
