3. Hardware Installations
SLC-8550-LVA
13
3.
Hardware Installations
This chapter provides information on how to use the jumpers and connectors on the product in order to set
up a workable system.
Installation procedure
(1) Confirm the power supply is off.
(2) Install the processor with correct orientation.
(3) Mount the Heat sink on the top of the processor. (The heat sink with a fan cable connects to the fan
connector on this board.)
(4) Insert the DDR DRAM module with correct orientation.
(5) Insert all external cables. (Keyboard, Mouse, LAN, etc.)
(6) Prepare a CRT monitor for CMOS setup.
(7) Turn on the power by power bottom.
(8) Enter the BIOS setup mode by pressing ‘Del’ key during boot up.
(9) Use the “Load Optimal Defaults” feature.
(10)Configure the
Peripheral Setup
and the
Standard Setup
correctly.
CAUTION
The CMOS memory may be in an undefined state at power-on after a period of no battery backup.
Summary of Contents for SLC-8550-LVA
Page 7: ...vi SLC 8550 LVA...
Page 19: ...2 System Reference 12 SLC 8550 LVA...
Page 31: ...3 Hardware Installations 24 SLC 8550 LVA...
