Contec PT-955SHX, User Manual

Page: 9 / 95

1. Introduction
2
PT-955SxX User’s manual
Improved durability due to its 5-wire resistive film touch panel
This product uses a 5-wire resistive film touch panel that has excellent durability, which provides a long
operating lifetime. Compared to our conventional product, the PT -955 Series, the number of operations
has increased from 10 million to 36 million*3.
- Slitless/fanless design that reduces maintenance work
This product's spindleless design eliminates the heat dissipating slit and CPU fan and adopts CFast card
for the storage. It is free from dusts and foreign objects, and the use the parts that degrades over the years
is avoided in most case, resulting in drastic alleviation of the maintenance burden.
- Major types of peripherals are supported with rich interfaces including the two CFast card slots
It has a variety of extended interface such as 1000BASE-T x 2, USB2.0 x 4, serial (RS-232C) x 2.
It has 2 CFast card slots that can use for OS and data. They are very useful because you can use one slot
for system start-up and the other for maintenance, system log, or taking away the collected data.
- Falling-off prevention tools and cable clamps provided to avoid trouble caused by disconnected cable
This product stays trouble-free, being equipped with USB removal prevention fitting and cable clamp for
connectors with no locking mechanism, such as USB cable, and with hardware to properly mount and
avoid falling out of CFast card.
- Safety design required for embedded applications
Retention of CMOS data by EEPROM allows the system to start up even when the battery has run out.
For Windows Embedded Standard installed model, it is possible to use the EWF*3 function of OS. It is
designed for safety required for embedding purpose, for example, prohibiting unwanted writing to the CF
card with EWF function will relieve the concern about the writing limits to the CF card and prevent an
unintentional system alteration.
*1 This is a comparison of actual measured values performed in CONTEC's environment on a Windows Embedded
Standard 7 model with the CrystalMark 2004R3 benchmark software.
*2 This is the median between the power consumption with no load and one with maximum load when using a 12VDC
input power supply.
*3 This value has been tested by mechanical touching under 300g of force at a rate of two presses per second.
*4 EWF (Enhanced Write Filter) is a function specific to Windows Embedded Standard that protects the disk from being
actually written by redirecting the writing to RAM.
Supported OS
- Windows® Embedded Standard 2009 32bit Japanese
- Windows® Embedded Standard 7 32bit Japanese