Contec PT-955SHX, User Manual

Page: 34 / 95

4. Each Component Function
PT-955SxX User’s manual
27
Giga bit-Ethernet : LAN A – B
This product is equipped with 2 ports for giga bit.
- Network type : 1000BASE-T/100BASE-TX/10BASE-T
- Transmission speed * : 1000M/100M/10M bps
- Max. network path length : 100m/segment
- Controller : Realtek 8111E (LAN/B)
Table 4.4. Giga bit-Ethernet Connector
LAN
Transmit
LED
Link
LED
8 1
Pin No.
Function
100BASE-TX 1000BASE-T
1 TX+ TRD+(0)
2 TX- TRD-(0)
3 RX+ TRD+(1)
4 N.C. TRD+(2)
5 N.C. TRD-(2)
6 RX- TRD-(1)
7 N.C. TRD+(3)
8 N.C. TRD-(3)
LEDs for display of network statuses:
Right LED : Link LED
Normal connection : Green ON, Operation : Green Blinking
Left LED : Operation LED
10M: Off, 100M : Green, 1000M : Orange
CAUTION
- Attention should to be paid to the guaranteed operating range of temperature in using 1000BASE-T.
For more details on this, refer to chapter3, Installation Requirements. Note that the Ethernet should
be configured as 100BASE-TX or 10BASE-T in using under the temperature 0 - 50°C.
- If you are using an operating system other than that of the preinstalled model, LAN-1 and LAN-2
may not be assigned to the silkscreen-printed "LAN-A" and "LAN-B."
- If you are using the Wake On LAN function, set the OS driver setting "Wake on Magic Pocket" to
"Enabled." Also, enable WOL on the BIOS setup screen (see chapter 5, "Advanced - ACPI Settings"
for details).