Contec FX-DS110-APL, User Manual, Page: 44 / 69

Settings
FX-DS110-APL
36
To Use Data scramble Functions for Better Security
(1) Start the utility software. From the main menu, select
Configuration, and then select the access point you wish to edit
from the access point name list.
*Once an APL on the network has been located using Search,
its settings are stored in a file. It is not necessary to use
Search each time the utility software is started.
(2) On the Base tab, use the Data Scramble checkbox and set the
scramble key.
(3) When the settings are complete, select [Write]. The settings
will be valid when the device is rebooted.
To Use SNMP Agent Functions
(1) Start the utility software. From the main menu, select
Configuration, and then select the access point you wish to edit
from the access point name list.
*Once an APL on the network has been located using Search,
its settings are stored in a file. It is not necessary to use
Search each time the utility software is started.
(2) On the SNMP tab, make the necessary settings (Community
Name, Access, Send Trap, Name, Location, Contact).
(3) When the settings are complete, select [Write]. The settings
will be valid when the device is rebooted.