Contec FX-DS110-APL, User Manual, Page: 42 / 69

Settings
FX-DS110-APL
34
Other Settings
Password (Activated by the 'Password' key on the
Configuration window)
Changes the password setting for this AP.
･
Current password
Enter the current password setting for this AP.
Factory setting: No setting
Input values: Up to 6 alphanumeric characters, case sensitive.
･
New password
Enter the new password.
Input values: Up to 6 alphanumeric characters, case sensitive.
･ Confirm password
For confirmation, enter the new password again.
The new password will only be established for the access point if it
is correctly entered twice. The new password will be effective
when the access point is restarted.
Input values: Up to 6 alphanumeric characters, case sensitive.
Enter Password
This box is displayed to require password entry for access to the
access point such as reading or writing setting values, firmware
maintenance, etc.
Input values: Up to 6 alphanumeric characters, case sensitive.
Default ([Default] key on the Settings screen)
Displays the default settings for IP address, subnet mask, and
default gateway on the screen. To apply these values, use the
[Write] key to write the values, then the [Reboot] key to reboot.