Contec FX-DS110-APL, User Manual, Page: 11 / 69

Introduction
FX-DS110-APL
3
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a
copy of the original invoice. Please obtain a Return Merchandise
Authorization Number (RMA) from the CONTEC group office
where you purchased before returning any product.
* No product will be accepted by CONTEC group without the
RMA number.
Liability
The obligation of the warrantor is solely to repair or replace the product.
In no event will the warrantor be liable for any incidental or
consequential damages due to such defect or consequences that arise
from inexperienced usage, misuse, or malfunction of this device.
Handling Precautions
Take the following precautions when handling this board.
･
Do not attempt to modify this device. The manufacturer will
bear no responsibility whatsoever for the device if it has been
modified.
･
Do not store this device in high temperature or low temperature
surroundings, or expose it to rapid temperature changes.
(Operating temperature range: 0° to 50°C)
･
Do not use or store this device where it is exposed to direct
sunlight or near stoves or other sources of heat.
･
Do not use or store this device where it is exposed to dust or high
humidity.
(Operating humidity range: 0-95%, without condensation)
･
This product contains precision electronic elements and must not
be used in locations subject to physical shock or strong vibration.
･
Do not use or store this device near strong magnetic fields or
devices emitting electromagnetic radiation.
･
If abnormal smells or heat are noticed, disconnect the power
supply immediately.
･
In case of abnormal operation or failure, contact the store where
this product was purchased.