Contec DIO-32DM3-PE User Manual Download Page 9

Page: 9 / 63

1. Before Using the Product

DIO-32DM3-PE

- You can use pull-up and the voltage selection.

At input points and control signals, you can use pull-up. In addition, the pull-up voltage can be selected

from the 3.3V and 5V. This feature allows you to easily connect and equipment with an output point of

the sink type.

- Functions and connectors are compatible with PCI compatible board PIO-32DM(PCI) and PCI

Express compatible board DIO-32DM2-PE, DIO-32DM-PE.

The functions same with PCI compatible board PIO-32DM(PCI) and PCI Express compatible board

DIO-32DM2-PE, DIO-32DM-PE are provided. In addition, as there is compatibility in terms of

connector shape and pin assignments, it is easy to migrate from the existing system.

LabVIEW is supported by a plug-in of dedicated library.

Using the dedicated library makes it possible to make a LabVIEW application.

Summary of Contents for DIO-32DM3-PE
































































Search results

Summary of Contents for DIO-32DM3-PE

Reviews:

Related manuals for DIO-32DM3-PE

Brands by name

Popular brands

Contec DIO-32DM3-PE, User Manual

Search results

Summary of Contents for DIO-32DM3-PE

Reviews:

Related manuals for DIO-32DM3-PE

Brands by name

Popular brands