Contec DIO-32DM3-PE, User Manual

Page: 55 / 63

5. About Software
48
DIO-32DM3-PE
Using Sample Programs
Sample programs have been prepared for specific basic applications.
For the API-DIO(WDM), The sample programs are stored in
\Program Files\CONTEC\API-PAC(W32)\DIOWDM\Sample
Use these sample programs as references for program development and operation check.
* When the installation folder is changed, the folder of the sample program is different.
Running a Sample Program
(1) Click on the [Start] button on the Windows taskbar.
(2) For the API-DIO(WDM), from the Start Menu, select “Programs” – “CONTEC API-PAC(W32)” –
“API-DIO(WDM)” – “SAMPLE…”.
(3) A sample program is invoked.
Sample list
Simple I/O : Executes digital I/O processing of the specified port.
Multiple port/bit I/O ports/bits : Simultaneously executes digital I/O processing of multiple
Monitoring Trigger : Monitors rising-edge/falling-edge triggers.
Interrupt : Executes interrupt processing of the specified board.
Sampling *1 : Executes pattern input (sampling) in 32bits.
Saves sampling data to a file.
Infinite Sampling *1 : Executes pattern input (sampling) in 32bits infinitely.
Saves sampling data to a file.
Generating *1 : Executes pattern output (generating) in 32bits.
Sync Sampling *1 : Executes synchronous operation of the two boards connected to
each other via a synchronization control connector.
*1: This sample can only be used on devices that are equipped with a bus master transfer function.