Contec DAI12-4FITGY, User Manual, Page: 8 / 65

Introduction
DAI12-4(FIT)GY
3
Control method by controller connected
* The API-SBP(W32) is included in the development kit
DTK-SBxx(FIT); the other drivers are bundled with each controller.
Control using the I/O address map
When connected to the CPU-SBxx(FIT)GY, the DAI12-4(FIT)GY can receive I/O
instructions directly from the controller module. For details, see Chapter 4 “Using the
I/O Address Map”.
Control using the memory address map
When connected to the CPU-CAxx(FIT)GY, the DAI12-4(FIT)GY can be accessed
from the host computer over the network.
The DAI12-4(FIT)GY is assigned with its device ID in the memory managed by the
controller module. The application running on the host computer controls the module
by reading/writing the memory managed by the controller module. For details, see
Chapter 5 “Using the Memory Address Map”.
Control via the Windows driver
For the functions and settings available when using the Windows driver, refer to the
reference manual and online help for each module.
Control over the web
You can monitor collected data and manage the log over the web. You can use your
familiar browser to easily make various settings. For details, refer to the reference
manual for the SVR-MMF2(FIT), SVR-MMF(FIT)GY.
CPU
-S
Bx
x(
FIT
)G
Y
CPU
-C
Ax
x(
FIT)
G
Y
SV
R-
M
M
F2
(F
IT)
SV
R-
M
M
F(
FIT
)G
Y
D
AI
12
-4
(U
SB
)G
Y
CP
U
-CA1
0(
U
SB)
G
Y
Control using the I/O address map
ο
Control using the memory address map
ο
FIT Protocol
ο
API-CAP(W32)
ο
API-SBP(W32)
ο
API-USBP(WDM)
ο ο
Control over the web
ο ο
Control via the Windows driver *