Contec CONPROSYS nano CPSN-PCB271-S1-041, Reference Manual, Page: 34 / 155

—
CONPROSYS nano WEB Setting
—
CPSN-PCB271-S1-041 Reference Manual (Software)
— 34 —
4. Log
Set the log functions.

Log Function
To record the log for this product using the log function, set to "Enabled".
You can prevent the log from being recorded by setting this setting to "Disabled", but in normal
operation this is unnecessary.
[Setting]: Disabled, Enabled
[Default]: Enabled

Save Log
To save the recorded log information as a file, set to "Enabled". To only temporarily retain the
recorded log information in memory, set to "Disabled".
Temporary retention means the log information is retained only while the device is running. When
"Disabled", the log information is deleted when the device restarts or the power is disconnected.
[Setting]: Disabled, Enabled
[Default]: Disabled

Log Save Interval (sec)
Set the interval for saving logs in seconds.
[Setting]: 1 - 86400
[Default]: 3600
CAUTION
When saving the file to ROM, there is a limit on the number of times of writing, so if you write
frequently, you may not be able to write to ROM.