Contec CONPROSYS nano CPSN-PCB271-S1-041, Reference Manual, Page: 145 / 155

—
Appendix
—
CPSN-PCB271-S1-041 Reference Manual (Software)
— 145 —

CPSN-DI-16BCL
Item Contents Default
Digital filter 0 ms - 1000 ms 1 ms
Count edge Rise, Fall, Both Rise
Count operation
Set operation status by using PLC program.
Setting value: Stop, Start
Stop
Count value setting Set an arbitrary value to counter by using PLC program. 0
Comparison value setting Set a value to compare with counter by using PLC program. 0
Count value zero clear Zero-clear counter by using PLC program. -
Status detection Count match status, Carry status -
Saving function of count value The current value is saved upon shutting down the power
or rebooting.
-

CPSN-AI-2408LI
Item Contents Default
Analog input method Single-ended input, Differential input Single-ended input
Analog input range ±10V, ±5V, ±2.5V, 0 - 10V, 0 - 5V,
±20mA, 0 - 20mA
±10V
Channel to use CH0 - CH7 Use all
Input data range The minimum value and the maximum value of the
input data can be set by user.
-10.0 - +10.0
Power supply noise (50/60Hz)
rejection *2
Disabled, Enabled Enabled
Channel
switching
rate *2 *3
Power supply noise
rejection (Disabled)
319 msec, 200 msec, 100 msec, 50 msec,
25 msec, 12.5 msec, 6.25 msec, 3.13 msec,
1.67 msec, 0.833 msec, 0.417 msec, 0.208 msec
40 msec
Power supply noise
rejection (Enabled)
59.9 msec, 50 msec, 40 msec, 36.7 msec
Resolution 24bit -
The number of channels Single-ended input: 8 channels
Differential input: 4 channels
-
Error detection Overvoltage detection, Low voltage detection,
Effective range detection.
-
Switch detect Setting items on the web setting page differ
according to the switch status.
-
LED indicator *1 OFF Indicates it is not set as the channel to be used or
is set to the differential input.
-
ON Data are properly entered. -
Flashing Detected an error. -
*1 Only even-numbered LEDs are used when setting to the differential inputs. (CH0=LED 0, CH1=LED 2 ...)
*2 This setting differs depending on the used firmware.
*3 The cut-off frequencies of the digital filter are listed below.