Contec CONPROSYS nano CPSN-PCB271-S1-041, Reference Manual, Page: 147 / 155

—
Appendix
—
CPSN-PCB271-S1-041 Reference Manual (Software)
— 147 —

CPSN-SSI-4C
Item Contents Default
Sensor type Type J, Type K, Type E, Type N,
Type R, Type S, Type T
Type K
Installation orientation Vertical installation, Vertical installation with an
angle of 90° to the right, Vertical installation with
an angle of 90° to the left,
Horizontal installation
Vertical installation
Channels to use CH0 - CH3 Use all
Offset Value -32768 to 32767 0
The number of channels 4 -
Error detection Fault data detection *1 -
LED indicator OFF Not set as the channel to be used. -
ON Data are properly entered. -
Flashing Detected an error. -
*1 Fault data details
When any of the bits is "1" in the list below, LED of the corresponding channel flashes.

CPSN-AO-1602LC
Item Contents Default
Analog output range ±10V, ±5V, 0 - 10V, 0 - 5V, 0 - 20mA ±10V
Resolution 16bit -
The number of channels 2 channels -