Contec CONPROSYS Linux SDK, User Manual

Page: 26 / 61

—
Run environment setting
—
CONPROSYS Linux SDK User’s Manual (Self -Build Edition)
— 26 —
Web Setup features following functions.
1. Setting
Each setting below can be set.
Setting menu
Setting type Content Default value Note
System Host name (Blank) Use the following host name when
there is no item in the setting
The model name + the lower 3 bytes
of MAC address
Network Wired LAN A 10.1.1.101(fixed IP)
Wired LAN B DHCP
3G/LTE network 3G/LTE model exclusively
Wireless LAN DHCP Only when connecting with
supported USB wireless adopter
Data & Time NTP server (Blank)
Manual setting
Service SSH server Upon system booting: enabled
FTP server Upon system booting: disabled
SAMBA server Upon system booting: disabled
Rooter function Rooter function Upon system booting: disabled
WAN interface
DHCP server Upon system booting: disabled
Static routing Upon system booting: disabled The maximum number of settings:32
Port forwarding Upon system booting: disabled The maximum number of settings:32
IP filter IP filter setting Upon system booting: disabled The maximum number of settings:64
2. Status
Each status below can be checked.
Status menu
Item Description
System This displays the host name, serial number, distribution/kernel information,
a disk/memory usage, and so on.
Network This displays such as IP address, MAC address, and RX/TX bytes.
Router Function This displays is routing information.
IP Filter This displays is IP filtering information.
Log This displays such as log information.