Contec CONPROSYS Linux SDK User Manual Download Page 32

Page: 32 / 61

—

Run environment setting

—

CONPROSYS Linux SDK User’s Manual (Self

-Build Edition)

—

Port forwarding function setting

Item name

Description

port_forward

Set port forwarding function.
enabled
disabled

port_fw_sif_1

Set port forwarding input interface.

port_fw_sport_1

Set port forwarding input port.

port_fw_daddr_1

Set port forwarding destination IP address.

port_fw_dport_1

Set port forwarding destination port.

port_fw_sif_32

Set port forwarding input interface.

port_fw_sport_32

Set port forwarding input port.

port_fw_daddr_32

Set port forwarding destination IP address.

port_fw_dport_32

Set port forwarding destination port.

* The number in the item names indicates setting number (up to 32).

IP filter function setting

Item name

Description

ipfilter

Set IP filter function.
enabled
disabled

ipfilter_kind_1

Set filter type.
ACCEPT
DROP

ipfilter_proto_1

Set protocol.
tcp, udp, icmp, all

ipfilter_saddr_1

Set the source IP address.

ipfilter_sport_1

Set the source port.

ipfilter_daddr_1

Set the destination IP address.

ipfilter_dport_1

Set the destination port.

ipfilter_kind_64

Set filter type.
ACCEPT
DROP

ipfilter_proto_64

Set protocol.
tcp, udp, icmp, all

ipfilter_saddr_64

Set the source IP address.

ipfilter_sport_64

Set the source port.

ipfilter_daddr_64

Set the destination IP address.

ipfilter_dport_64

Set the destination port.

* The number in the item names indicates setting number (up to 64).

Summary of Contents for CONPROSYS Linux SDK






























































Search results

Summary of Contents for CONPROSYS Linux SDK

Reviews:

Related manuals for CONPROSYS Linux SDK

Brands by name

Popular brands

Contec CONPROSYS Linux SDK, User Manual

Search results

Summary of Contents for CONPROSYS Linux SDK

Reviews:

Related manuals for CONPROSYS Linux SDK

Brands by name

Popular brands