4. Functions
40
CNT-3204MT-LPE
Single-phase Input
For a single-phase input, the count increments when an UP pulse is input and decremented when a
DOWN pulse is input. The count remains unchanged if UP and DOWN pulses are input simultaneously.
* Count operation for incremental counting in the CW direction. When decremental counting in the CW direction is
set, the board performs decremental counting at the rising edges of positive pulse and incremental counting at the
rising edges of negative pulses.
Figure 4.2. Example counting during single-phase input
Single-phase Input with Gate Control Attached
The counter can be started and stopped using a gate control signal input along with the single-phase
pulse stream.
* Count operation for incremental counting in the CW direction. When decremental counting in the CW direction is
set, the board performs decremental counting at the rising edges of the single-phase pulse train (phase-A/UP) while
the gate control signal (phase-B/DOWN) goes high and stops counting while the gate control signal goes low.
Figure 4.3. Example counting during single-phase input with gate control attached
6
7
8
5
7
6
UP pulse
(Phase-A/UP)
DOWN pulse
(Phase-B/DOWN)
Count value
7
8
6
9
Series of single-phase
pulses (Phase-A/UP)
Gate control signal
(Phase-B/DOWN)
No counting
Count value
Summary of Contents for CNT-3204MT-LPE
