Contec AIO-120802LN-USB User Manual Download Page 84

Page: 84 / 105

6. Function

AIO-121602LN-USB, AIO-120802LN-USB

Setting data

Use a software command to save the data in memory.
The figure below shows the relationship between the conversion data stored in memory and the

sampling count and conversion channels.

The procedure for setting the conversion data is different depending on the memory format being used.

Procedure for FIFO format

When using FIFO format, setting data to memory is always performed from the most recent data.
New data can be added during conversion.

Procedure for RING format
When using ring format, a ring memory area large enough for the data to be set is reserved.

Data cannot be modified during DA conversion.

Summary of Contents for AIO-120802LN-USB










































































































Search results

Summary of Contents for AIO-120802LN-USB

Reviews:

Related manuals for AIO-120802LN-USB

Brands by name

Popular brands

Contec AIO-120802LN-USB, User Manual

Search results

Summary of Contents for AIO-120802LN-USB

Reviews:

Related manuals for AIO-120802LN-USB

Brands by name

Popular brands