Contec ADA16-32/2(PCI)F User Manual Download Page 87

Page: 87 / 109

5. About Software

ADA16-32/2(PCI)F

About Software for Windows

The bundled CD-ROM “Driver library API-PAC(W32)” contains the functions that provide the

following features:

Analog input or output through arbitrary channels

Analog input at arbitrary intervals using the internal or external sampling clock

Simultaneous monitoring of the termination of analog input sampling, buffer memory usage, and

interrupt events such as occurrences of errors

Driver option check using a demo driver even without the board installed

For details, refer to the help file. The help file provides various items of information such as “Function

Reference”, “Sample Programs”, “Tutorial”, “FAQs”and “Troubleshooting”. Use them for program

development and troubleshooting.

Accessing the Help File

(1) Click on the [Start] button on the Windows taskbar.

(2) From the Start Menu, select “Programs” – “CONTEC API-PAC(W32)” – “AIOWDM” –

“API-AIO(WDM) HELP” to display help information.

Summary of Contents for ADA16-32/2(PCI)F














































































































Search results

Summary of Contents for ADA16-32/2(PCI)F

Reviews:

Related manuals for ADA16-32/2(PCI)F

Brands by name

Popular brands

Contec ADA16-32/2(PCI)F, User Manual

Search results

Summary of Contents for ADA16-32/2(PCI)F

Reviews:

Related manuals for ADA16-32/2(PCI)F

Brands by name

Popular brands