Contec AD12-16(PCI), User Manual

Page: 63 / 76

Sample Program for MS-DOS
AD12-64(PCI), AD12-16(PCI)
56
TI.C Interrupt function sample program source file
(Interrupt source : Timer Status)
TII.EXE Interrupt function sample program
(Interrupt source : Timer Status)
EXTI.C Interrupt function sample program source file
(Interrupt source : Ext. Trigger Input)
EXTI.EXE Interrupt function sample program
(Interrupt source : Ext. Trigger Input)
Sample for NEC PC-98 compatible computers
AII98.C Interrupt function sample program source file
(Interrupt source : Data Read Enable)
AII98.EXE Interrupt function sample program
(Interrupt source : Data Read Enable)
TI98.C Interrupt function sample program source file
(Interrupt source : Timer Status)
TII98.EXE Interrupt function sample program
(Interrupt source: Timer Status)
EXTI98 Interrupt function sample program source file
(Interrupt source : Ext. Trigger Input)
EXTI98.EXE Interrupt function sample program
(Interrupt source: Ext. Trigger Input)
Preparation
(1) Verify settings of board ID using SW1 on the board.
(2) Install the board on a PC.
(3) Turn on the power of a PC and start up MS-DOS.
(4) Insert provided setup disk to an available disk drive.
The sample programs are contained in the following directory if the
setup disk is inserted in drive "A":
A:¥DOS