Contec AD12-16(PCI), User Manual

Page: 27 / 76

Setup
AD12-64(PCI), AD12-16(PCI)
20
Checking resources
Before operating the board, be sure to check the personal computer
resources (I/O addresses and interrupt level) assigned to the board.
For PCI compatible (Plug and Play Compliant) board, free
resources among the personal computer resources are assigned
automatically upon activation of the personal computer. Follow
the steps below to check the assigned resources.
(1) Run the resource check program "AIOPCI.EXE" stored in the
DOS directory on the supplied floppy disk (FD).
(2) Check the I/O addresses and interrupt level (IRQ) displayed on
the screen. Once the board has been set up correctly, it can be
used under MS-DOS.
Obtaining resource information
You can get information on the personal computer resources
assigned to the board by accessing the PCI BIOS. For the precise
method, refer the AIOPCI.C stored in the DOS directory on the
supplied FD.