CONTACLIP 16368.2 Instruction Manual Download Page 37

Page: 37 / 42

GSM-PRO2

- 35 -

Troubleshooting

14.1

Cannot connect to the PC, no module found

•

Re-connect the USB cable from the PC.

•

Reboot the PC (after driver installation).

•

Start the program as administrator, right click->Run as administrator.

•

Try a different USB port, remove any hubs or extension cables.

14.2

No connection to GSM network

•

Make sure the SIM card is placed correctly.

•

Check the diagnostics tab for error messages, PUK or PIN required.

•

Check the signal strength.

14.3

The module doesn’t send any messages

•

Is the used IO proper set.

•

Make sure the SIM card is placed correct.

•

Does the prepaid card holds enough credit.

•

Check your email spam/unwanted box.

14.4

The module doesn’t start

•

Disconnect from power, wait 5 minutes and reconnect to power.

14.5

Diagnosis

For additional troubleshooting, the activities in the module can be monitored with the diagnosis window. To
open this right click the GSM-

PRO2 icon in the taskbar and select ‘open Diagnostics’.

Summary of Contents for 16368.2











































Search results

Summary of Contents for 16368.2

Reviews:

Related manuals for 16368.2

Brands by name

Popular brands

CONTACLIP 16368.2, Instruction Manual

Search results

Summary of Contents for 16368.2

Reviews:

Related manuals for 16368.2

Brands by name

Popular brands