5
If the MRX1 is going to be mounted directly to a plasterboard wall, or a deep single gang metal back box , the power supply
that comes attached to the back plate can be used.
11.1 MRX1 Installation Option 1
Connections
On the rear of the
back plate there
are 2 connections
marked line and
neutral, they must
be connected to
230VAC via a 3A
fuse.
Fixing the MRX
The back plate can be
mounted directly to a single
gang back box using the
elongated holes as shown in
picture.
For screwing directly to a
plasterboard wall the holes
in each corner can be used.
Once the power supply has been connected to the incoming mains and the back plate has been secured, connect the white
lead back onto the screen and clip the screen back into place. *Note: When clipping the screen into place take care not to
trap the red aerial lead on the back of the screen.
11.2 MRX1 Installation Option 2
If the MRX1 is going to be mounted into a metal or plastic back box 25-32mm deep, the small white power supply supplied with
the MRX1 must be used.
The power supply
must installed
exactly as per
picture, otherwise it
will not fit. Line and
neutral 230VAC
must be connected
to the power supply
via a 3A fuse.
Red lead —Line
Black lead—Neutral
Note: It takes 30
seconds to power
up the device
Fixing the MRX
Connections
Once the power supply has been connected to the incoming mains and the back plate has been secured, connect the white
lead back onto the screen and clip the screen back into place. *Note: When clipping the screen into place take care not to
trap the red aerial lead on the back of the screen.
The power supply that
comes fixed to the
MRX1 must be removed
by gently applying
pressure to each
corner, unclipping the
two parts.
The back plate can be mounted directly
to a single gang back box using the
elongated holes as shown in picture.
Should you need any advice on the use of you new Consort product, or should you require service or repair, please contact our Helpline:
Tel: 01646 692172 Fax: 01646 695195
Email: [email protected]
The MRX1 is guaranteed for one year against faulty material or workmanship. This applies only if the appliance has been used for purposes in
accordance with the instructions provided and has not been misused, neglected, damaged, modified or repaired by any person not authorised
by us. This guarantee is offered to you as an extra benefit and does not affect your legal rights.
Consort Equipment Products Ltd.
Registered Office: Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT
Tel: 01646 692172 | Fax: 01646 695195
[email protected] | [email protected]
BS EN ISO 9001 Registered Company No FM12671
Reasonable care has been taken to ensure that this guide is accurate at the time of printing. In the interest of progress, the Company reserve
the right to vary specifications from time to time without notice.
12 Customer Helpline