Conrad STV-1280, Operating Instructions Manual

Page: 47 / 111

47
d) Selecting the volume (buttons “VOL+”/”VOL-”, “VOL ”/”VOL ”)
The volume can be set with the two small keys “VOL+’” and “VOL-” or with the large buttons “VOL ”
and “VOL ”.
A bar is faded in with TV playback or CVBS/video and S-video.
e) Mute (“MUTE” button)
You can turn off the audio playback with the “MUTE” button on the remote control. Pressing this
button again restores the previous volume.
f) MTS Function (“MTS” button)
The button “MTS” serves to select the audio channels of the respective displayed TV station (mono,
second audio channel, stereo).
Switching is only possible if the TV station sends a multi-channel audio signal, for
example (e.g. English and the original language of a film).
g) Selecting TV channels (buttons “CH+”/”CH-”, “CH ”/”CH ”)
You can select the desired TV channel with the small buttons “CH+’” and “CH-” or the large buttons
“CH
” and “CH ”.
Please note:
These buttons are only active when TV playback was selected.
If you know the number of a channel by which it is saved in the TV box, you can of course enter it
directly (e.g. enter “55” for channel 55).
Enter the channels 1-10 as “001” to “010”. If you only enter “3”, for example, you have to
wait a few seconds, as the TV box expects you to press more buttons. Then it switches
to channel 3.
As of channel 11, just enter the 2-digit channel number (e.g. 55)