27
Using The Camera in PIR Detection Mode
•
Mount the camera to the tree or wall or other sturdy
object using either a supplied wall mounting device or
supplied mounting strap.
•
Open the bottom housing and slide the switch to either
one of the
CAM
or
PSET
modes. At this point, you have 30
seconds to make any mode selection changes before
camera is ready to use.
•
If you chose CAM mode then make sure your camera is in
the PIR mode and not Time Lapse
(TLS)
. If you are not
sure, please follow the “
Camera setup and program
”
above to set the camera into the proper mode.
To Capture Images, make sure display reads CAM:
Once in
CAM
mode, if the display does not read
CAM
then,
•
Press the
[M]
button once.
•
If the LCD display does not show word
CAM
in blinking.
•
Press the
[UP]
button ONCE to toggle to Camera mode.
•
Press the
[OK]
button and then
[M]
Button to exit.
To Capture Videos, make sure display reads VIDEO:
Once in
CAM
mode, if the display does not read
VIDEO
then,
•
Press the
[M]
button once.
•
If the LCD display does not show word
VIDEO
in blinking.
•
Press the
[UP]
button ONCE to toggle to Video mode.