20
Setting the Time Out in PIR mode:
Your
HUNTING CAMERA
can be programmed
to set the amount of
time in seconds or minutes the camera will sleep between PIR
triggers
.
•
Slide the switch to the
CAM
position, LCD display will
show the camera status screen.
•
Press the
[M]
button once within 30 seconds to enter the
programming mode.
•
The word
PIR
will be blinking, press
[OK]
to confirm the
camera’s operation is PIR detection.
•
Press
[UP]
or
[DN
] button until the word
T-O
(Time Out) is
blinking.
•
Press
[OK]
button and the
MINUTES
digits will be blinking.
•
Press
[UP]
or
[DN]
button to increase or decrease the
time value in minutes from 00 to 10 minutes in 1-minute
increments.
•
Press
[OK]
to save the minute setting and the
SECONDS
digits will be blinking.
•
Press
[UP]
or
[DN]
button to increase or decrease the
time value in seconds from 05 to 55 seconds in 5-second
increments.
•
Press
[OK]
to save the second setting.
•
You’ll then see the word
T
(Time) blinking. Press
[OK]
button to enter time setting or press
[M]
button to exit.
