23
•
Press
[OK]
to confirm and go into TLS Mode "Start Time"
setting.
•
The display will show
T
+
S-88:88
(S = Start, 88:88 = time in HH:MM).
•
Press
[OK]
to set the “Start Time”
setting. At this point you can adjust
the time from 00:00 to 23:59.
•
The
MINUTE
digits will be blinking.
•
Press
[UP]
or
[DN]
to increase or
decrease the minute value (00 –
59).
•
Press
[OK]
to save your selection
and enter Hour setting.
•
The
HOUR
digits will be blinking.
•
Press
[UP]
or
[DN]
to increase or
decrease the hour value (00 – 23).
•
Press
[OK]
to save the “Start Time”
setting and move to the “End Time” setting.
•
After completing the start time setting, camera will go
into TLS Mode "End Time" setting.
•
The display will show
T
+
E-88:88
•
(E = End, 88:88 = time in HH:MM)
•
At this point you can adjust the time from 00:00 to 23:59
by pressing the
[UP/DN/OK]
buttons same as Start Time
settings.
